|Date||Date of Registration : Nov 19, 2018
Date of Revision : Nov 19, 2018
|Country / Area||Csongrad, Hungary|
2911 Electron tube, semiconductors, IC, etc.
2209 Other metallic products
2919 Other electric and electronic parts
|Target Country / Area||All Countries / Areas|
*Attention: JETRO shall not take any responsibility for the contents provided by users. Please take note of the fact that JETRO leaves the exactness and reliability of the contents to users' judgment.
Explosive Cladding for the Electrical Industry
<< DESCRIPTION >>
We introduce Hungarian company with the know-how of explosive cladding of two different materials for manufacturing electrical components. The company is seeking to find companies with cooperative intents from the electrical appliance or vehicle industry.
Explosive cladding is a solid state process in which controlled explosive detonations force two or more metals together at high pressures, resulting a high quality metallurgical bond between the colliding surfaces. The bonding zone of the two metals has a characteristic wave-form.
The major advantages of the explosive cladding process in comparison the conventional ones are that bond can be create between normally incompatible metals (e.g. aluminium and steel:) and also that there is no practical limit to the ratio of thickness of the metals to be bonded. It is feasible to apply a minimum thickness of the expensive cladding metal on the inexpensive base metal the process requires minimum facilities and tooling.
- Metal combinations possible which are conventionally impossible to weld i.e.: Cu/Al, Al/Steel etc.
- Cost saving: thin layer of expensive material cladded on a thicker layer of cheap material
- Original metal properties remains
- Joint bond stronger than the weakest material
- Low electrical resistance of anode/cathode blocks
The company is looking for partners interested in purchasing the know-how or purchasing the raw material (bimetal sheets) which can be later rolled to reduce its thickness and manufacture optional products (e.g.: washer, cable lugs etc.).
<< EXAMPLES OF ACTUAL APPLICATIONS >>
In the electrical industry, the most commonly used pair of materials is copper and aluminium, which is normally used in electrical current circuits, built-in fittings.
The concept of the know-how is to prepare bimetal terminal connectors that are geometrically identical to the traditional ones. The copper surface of the bimetal plate would be in contact with the copper blade terminal, the other one with the aluminium wire.
The electrical industry, the vehicle production, the nuclear technique use many special multicomponent materials, and component parts as two- or more-layer cladded plates, sheets, wires and component parts. Applying conventional metal processing techniques as stamping, clamping, machining on explosively cladded two- or three-layer metals, different component parts can be manufactured as bimetallic washers, thermos-bimetals, superconducting joints etc.
HungaryJan 09, 2019 RegistrationJan 09, 2019 Revision
Total Sum of CONTACT Received : 0
HungaryNov 15, 2018 RegistrationNov 16, 2018 Revision
Total Sum of CONTACT Received : 5
HungaryNov 08, 2018 RegistrationNov 08, 2018 Revision
Total Sum of CONTACT Received : 2
HungarySep 07, 2018 RegistrationSep 07, 2018 Revision
Total Sum of CONTACT Received : 4
HungaryApr 25, 2018 RegistrationApr 25, 2018 Revision
Total Sum of CONTACT Received : 0