|Date||Date of Registration : Apr 19, 2018
Date of Revision : Apr 19, 2018
|Country / Area||Csongrad, Hungary|
8202 Fire prevention goods and equipment
8403 Industrial waste pollution control
|Target Country / Area||All Countries / Areas|
*Attention: JETRO shall not take any responsibility for the contents provided by users. Please take note of the fact that JETRO leaves the exactness and reliability of the contents to users' judgment.
Provide Technology: Pressurized Foam Fire Protection System for Storage Tanks
<< DESCRIPTION >>
This technology is a storage tank fire extinguishing technology particularly for large storage tanks with the most effective fire protection solution in its category. The technology uses a high pressure foam application which is called Superintensive Foam Flooding.
The extremely high foam flow rate is provided through a special device, which accommodates the expansive foam flow and prevents excessive velocities in the nozzle. It provides an ideal curtain like foam application pattern, thus providing substantial and continuous cooling of the tank wall.
Pressurized foam is prepared well in advance under calm and controlled conditions. The pre-made mixture is stored in a pressure vessel until the moment of use. This special mixture remains homogenous for at least 10 years.
Its extinguishing time is 20x faster than the only successful process of this scale. Tests were carried out on a 500 m2 surface gasoline tank which was set on fire repeatedly and resulted in extinguishment in less than 40 seconds. The effective burning area is narrowed from the outset so the environmental and property damage is minimal. The reliability of the system is extremely high, the valve is the only moving part in it, while the foam application device itself is very robust and resistant.
Besides being fast, environment-friendly and trustable the other advantages are that it does not need water, external energy sources or human intervention to operate and it costs less to install than standard systems. Plus it has no release rate limitations, it can achieve an application rate of 20-40 liters/min/m2.
*Our Role for this Technology
Our partner, a Hungarian SME has developed this technology.
*Examples of this Technology Adoptions
For example in the oil storage industry.
Exclusive license, Non Exclusive license, Service providing.
HungaryJan 09, 2019 RegistrationJan 09, 2019 Revision
Total Sum of CONTACT Received : 0
HungaryNov 19, 2018 RegistrationNov 19, 2018 Revision
Total Sum of CONTACT Received : 1
HungaryNov 15, 2018 RegistrationNov 16, 2018 Revision
Total Sum of CONTACT Received : 5
HungaryNov 08, 2018 RegistrationNov 08, 2018 Revision
Total Sum of CONTACT Received : 2
HungarySep 07, 2018 RegistrationSep 07, 2018 Revision
Total Sum of CONTACT Received : 4