|Date||Date of Registration : Jan 22, 2016
Date of Revision : Jan 09, 2017
|Country / Area||Jiangsu, People's Republic of China|
0401 Inorganic chemical products (caustic soda, sulfuric acid, ammonium chloride)
0509 Other chemical products
0502 Catalysts, additives, gelatin, casein
|Target Country / Area||All Countries / Areas|
*Attention: JETRO shall not take any responsibility for the contents provided by users. Please take note of the fact that JETRO leaves the exactness and reliability of the contents to users' judgment.
Polydadmac (PDADMAC, PDMDAAC)
<< FEATURES & CHARACTERISTICS >>
We supply polydadmac.
The product is cationic linear high molecular polymer, which is true solution completely soluble in water.
PolyDADMAC / PDADMAC / PDMDAAC / Poly diallyl dimethyl ammonium chloride
(CAS No. 26062-79-3)
Appearance: Colorless or light yellow transparent viscous liquid
Solid Content: 19.0 - 41.0
Dynamic Viscosity / mpa@s (20 degrees Celsius): 40 - 12000
PH: 2.5 - 7.0
Residual Monomers (%): 5.0 max.
This product is mainly used in the paper-making, textile dyeing and finishing process.
Neutralizes anionic trash in papermaking systems to enhance retention aid performance.
Safety, non-toxic and Strong coagulating performance for water purifying.
Improves retention of wet end functional additives including sizing agents dry strength additives, dyes, pigments and fillers.
Fixes wood pitch and synthetic stickies to fibers.
Enhances drainage for energy savings in sheet forming, pressing and drying.
Decreases white water solids to improve raw material yield and saveall efficiency.
Performs over a wide pH range with or without the use of papermakers.
Maintains cationic charge in alkaline, acid and neutral papermaking systems.
Improves paper machine output and runnability for maximum return on investment.
Contains no VOC or surfactant components to harm the environment.
Applied as polymer coagulant and flocculant for water treatment in many industries
Promoter in paper size process
Cationic runnability aid for the pape-rmaking process
High viscosity grade, 125kg/plastic drum
Low viscosity grade, 250kg/plastic drum, 1,000kg/IBC drum
<< PRICE REFERENCE >>
<< PAYMENT TERMS >>
T/T or L/C
<< MINIMUM ORDER QUANTITY >>
|Conditions of Products
/ Parts Inventory
Made to Order Acceptable
|Orders from Individual|
|Delivery Time||Less than 1week(s)|
Jiangsu, People's Republic of ChinaJan 22, 2016 RegistrationJan 09, 2017 Revision
Total Sum of CONTACT Received : 0
Jiangsu, People's Republic of ChinaJan 20, 2016 RegistrationJan 09, 2017 Revision
Total Sum of CONTACT Received : 1