|Date||Date of Registration : Nov 07, 2013
Date of Revision : Oct 01, 2019
|Country / Area||Maharashtra, India|
2501 Metal working machineries and parts of such
2809 Other machine element and parts
|Target Country / Area||All Countries / Areas|
*Attention: JETRO shall not take any responsibility for the contents provided by users. Please take note of the fact that JETRO leaves the exactness and reliability of the contents to users' judgment.
Leveler Roller for CTL Lines
<< FEATURES & CHARACTERISTICS >>
We provide LEVELER ROLLERS.
Leveler rollers are used in the CTL lines. These rollers are being utilized in heavy as well as light levelers (cut-to-length line). The thickness of the coil handled varies from 0.2 mm to 10 mm and the width varies from 0.5 m to 3 m. The linear speed of the coil is up to 80 mpm.
The leveler rollers are very critical and the barrel diameter of the rollers has to be controlled within very fine tolerances for effective functioning of the equipment. Besides this, these rollers are subject to two types of tilting forces.
The elasticity of the material is the key property to be considered for material selection. The suitable grades of alloy steel which can simultaneously meet the required combination of elasticity, toughness and surface hardness are used to manufacture these rollers.
The bars are ND tested (in proof machined condition) to determine surface / internal defects. The rollers are then subjected to the appropriate heat treatment cycles. The degree of surface hardness obtained after heat treatment is measured. The rollers are then ground to attain the fine tolerances (which ensures proper functioning).
After all quality parameters are satisfactorily met, a coat of anti-rust chemical is applied all over the roller. The entire roller is suitably wrapped with plastic paper / sleeve. The rollers are then packed in individual wooden boxes (or as mutually agreed).
Please visit our website for further details. Do send us your enquiries for your similar requirements and we shall be glad to furnish any further details required by you.
<< PRICE REFERENCE >>
Please ask us.
<< PAYMENT TERMS >>
<< MINIMUM ORDER QUANTITY >>
|Conditions of Products
/ Parts Inventory
Made to Order Acceptable
|Orders from Individual||Acceptable|
|Delivery Time||Less than 8week(s)|
|Trade Terms||EX WORKS (EXW)|